Site Content

Don't fret! You can download a digital copy here!

Yes! The Eazy Treezy stand can be used over and over, year after year.

Eazy Treezy can accommodate trees up to 10 feet tall with trunk diameters between 2 ½ to 5 ½ inches.

1) Lift your tree and set it on top of the patented angled Eazy Treezy jaws.

2) Position your tree so that is straight up-and-down.

3) Push it down. 

That's it! Just drop in and done!

The stand is not intended to be used with artificial trees, though if the tree “trunk” diameter is at least 2 1/2” it can work.

Let's face it, we all make mistakes. There may come a time in your excitement to get your tree set up faster than ever that you might drop it in crooked. Now what? Well, you have two choices: 

1) Lift the tree out and try again, or 

2) Push down on one or two of the jaws on the side of the Eazy Treezy that you'd like the tree to lean toward, then push the tree upright and release the jaws.

If you have a very large tree or maybe a few rambunctious kids running around that might decide to attempt a flying tackle on your beautifully decorated Christmas tree, you can have an added degree of security by screwing down your Eazy Treezy stand to a large piece of plywood...or if you're really committed, right into your hardwood floor, but we don't recommend that!

In order to keep your tree fresh and green it will need a good supply of water. After you bring your Christmas tree home, get the bottom of the fresh cut trunk into your Eazy Treezy and add water as soon as possible. It's important that the water level not drop below the bottom of the tree trunk, which will be ¼ of an inch to 1 inch off the bottom of the base. Use the check and fill spout to monitor the water level regularly and add water as necessary.

1) Step on the top lip of the base of the Eazy Treezy stand.
2) Pull the tree straight up and out.
Note: occasionally a branch stub may get caught under a jaw, in this case use your foot or hand to push down on the jaw, then lift out the tree.